Hyundai Palisade: Seats / Front Seats
WARNING
Take the following precautions
when adjusting your seat:
- NEVER attempt to adjust the
seat while the vehicle is moving.
The seat could respond
with unexpected movement
and may cause loss of vehicle
control resulting in an accident.
- Do not place anything under
the front seats. Loose objects
in the driver's foot area could
interfere with the operation of
the foot pedals, causing an
accident.
- Do not allow anything to interfere
with the normal position
and proper locking of the seatback.
- Do not place a cigarette lighter
on the floor or seat. When you
operate the seat, gas may exit
out of the lighter causing a fire.
- Use extreme caution when
picking up small objects
trapped under the seats or
between the seat and the center
console.Your hands might
be cut or injured by the sharp
edges of the seat mechanism.
CAUTION
To prevent injury:
- Do not adjust your seat while
wearing your seat belt.
Moving the seat cushion forward
may cause strong pressure
on your abdomen.
- Do not allow your hands or
fingers to get caught in the
seat mechanisms while the
seat is moving.
Adjusting the seats so that you are
sitting in a safe, comfortable position
plays an important role in driver and
passenger safety together with the
seat belts and air bags in an accident
WARNING
Do not use a cushion that
reduces friction between the
seat and the passenger...
The front seat can be adjusted by
using the levers located on the outside
of the seat cushion. Before driving,
adjust the seat to the proper
position so that you can easily control
the steering wheel, foot pedals
and controls on the instrument
panel...
Other information:
The paddle shifter is available when
the gear is in the D (Drive) position.
Pull the [+] or [-] paddle shifter once
to shift up or down one gear and the
system changes from automatic shift
mode to manual shift mode.
To change back to the automatic shift
mode from manual shift mode, do
one of the following:
Gently depress the accelerator
pedal for more than 5 seconds...
Description and operation
Description
The evaporator temperature sensor will detect the evaporator core temperature
and interrupt compressor relay power in order to prevent evaporator from freezing
by excessive cooling.
Repair procedures
Inspection
1...
Categories
Rear seat adjustment
Forward and rearward
(2nd row seat)
To move the seat forward or rearward:
1. Pull the seat slide adjustment
lever up and hold it.
2. Slide the seat to the position you
desire.
read more