Hyundai Palisade: Braking system / Disc Brakes Wear Indicator

Hyundai Palisade (LX2) 2020-2024 Owner's Manual / Driving Your Vehicle / Braking system / Disc Brakes Wear Indicator

When your brake pads are worn and new pads are required, you will hear a high pitched warning sound from your front or rear brakes. You may hear this sound come and go or it may occur whenever you depress the brake pedal.

Note that some driving conditions or climates may cause a brake squeal when you first apply (or lightly apply) the brakes. This is normal and does not indicate a problem with your brakes.

NOTICE

To avoid costly brake repairs, do not continue to drive with worn brake pads.

Information

Always replace brake pads as complete front or rear axle sets.

Braking system

Power Brakes Your vehicle has power-assisted brakes that adjust automatically through normal usage. If the engine is not running or is turned off while driving, the power assist for the brakes will not work...

Electronic Parking Brake (EPB)

Applying the parking brake To apply the EPB (Electronic Parking Brake): 1. Depress the brake pedal. 2. Pull up the EPB switch. Make sure the Parking Brake i Warning Light comes on...

Other information:

Hyundai Palisade (LX2) 2020-2024 Service Manual: Automatic Transaxle Fluid (ATF)

Components and components location Components Location 1. ATF Injection plug (Eyebolt) 2. ATF injection plug gasket 3. ATF level check plug 4. ATF level check plug gasket 5. Drain plug gasket 6. Drain plug Repair procedures Automatic Transaxle Fluid (ATF) Level Check • When checking the oil level, be careful not to enter dust, foreign matters, etc...

Hyundai Palisade (LX2) 2020-2024 Owner's Manual: Climate control additional features

Cluster ionizer (if equipped) When the ignition switch is in the ON position, the clean air function turns on automatically. Also, the clean air function turns off automatically, when the ignition switch is in the OFF position. Automatic Ventilation (if equipped) When the ignition switch is in the ON position or when the engine is running and temperature is below 59°F (15°C) with the recirculation mode selected more than three to five minutes, the air intake position will automatically change to fresh mode...