Hyundai Palisade (LX2): Braking system / Electronic Parking Brake (EPB)
Applying the parking brake
To apply the EPB (Electronic Parking Brake):
1. Depress the brake pedal.
2. Pull up the EPB switch.
Make sure the Parking Brake i Warning Light comes on.
WARNING
To reduce the risk of SERIOUS INJURY or DEATH, do not operate the EPB while the vehicle is moving except in an emergency situation. It could damage the brake system and lead to an accident.
- Releasing the parking brake
- Warning messages
- EPB malfunction indicator
- Parking brake warning light
- Emergency braking
When your brake pads are worn and new pads are required, you will hear a high pitched warning sound from your front or rear brakes. You may hear this sound come and go or it may occur whenever you depress the brake pedal.
To release the EPB (Electronic Parking Brake): Place the ignition switch in the ON position. Depress and hold the brake pedal. Press the EPB switch.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Receiver-Drier
Repair procedures SReplacement 1. Remove the condenser. (Refer to A/C System - "Condenser") 2. Remove the cap (B) on the bottom of the condenser with an L wrench (A). Tightening torque : 2.
Hyundai Palisade (LX2) 2020-2026 Service Manual: Front Radar Unit
Specifications Specification Item Specification Power supply (V) 12 Operation voltage (V) 9 - 16 Description and operation Description The smart cruise control unit is installed on the front right-hand side of the chass
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Scheduled maintenance services
- ISG (Idle Stop and Go) system
- Removing and Storing the Spare Tire
- New on site
- Most important about car
