Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer tor Body - "Front Bumper") 3.
Repair procedures Oil Specification 1. The R-134a or R-1234yf system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2.
Description and operation Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level →