Hyundai Palisade (LX2): Auto Lighting Control System / Specifications

Hyundai Palisade (LX2) 2020-2026 Service Manual / Body Electrical System / Auto Lighting Control System / Specifications

Specifications
Items
Specifications
Rated voltage
 DC +5V
Load
 Max. 1mA (When head lamp lighting)
Auto light sensor
 Illuminations (Lux)
 100
 0.76 ± 0.17V
150
 1.3 ± 0.30V
Photo sensor (Single)
 Illuminations (Lux)
 100
 0.56 ± 15%V
150
 0.86 ± 15%V
Photo sensor (Dual)
 Illuminations (Lux)
 100
 0.28 ± 15%V
150
 0.43 ± 15%V

    Component Location 1. Auto light sensor 2. Head lamps 3. Lighting switch (Auto) 4. Tail lamps 5. IBU (Integrated Body Control Unit)

    Other information:

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Mode Control Actuator

    Description and operation Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level →

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Troubleshooting

    Trouble Symptom Charts Trouble Symptom 1 Trouble Symptom 2 Trouble symptom Probable cause Remedy The set vehicle speed varies greatly upward or downward "Surging" (repeated alternating acceleration and deceleration) occurs after set

    Categories

     
    Copyright © 2026 www.hpalisadelx.com - 0.0286