Hyundai Palisade: Seat Belts / Seat Belt Restraint System
WARNING
Improperly positioned seat belts
may increase the risk of serious
injury in an accident.Take the following
precautions when adjusting
the seat belt:
- Position the lap portion of the
seat belt as low as possible
across your hips, not on your
waist, so that it fits snugly.
- Position one arm under the
shoulder belt and the other over
the belt, as shown in the illustration.
- Always position the shoulder
belt anchor into the locked
position at the appropriate
height.
- Never position the shoulder
belt across your neck or face.
❈ 7 passengers (A)
- 2nd row : 1, 3
- 3rd row : 4, 5, 6
❈ 8 passengers (B)
- 2nd row : 1, 2, 3
- 3rd row : 4, 5, 6
As a reminder to the rear passenger,
the rear passenger's seat belt warning
lights will illuminate for approximately
6 seconds each time you turn
the ignition switch ON regardless of
belt fastening...
To fasten your seat belt:
Pull the seat belt out of the retractor
and insert the metal tab (1) into the
buckle (2). There will be an audible
"click" when the tab locks into the
buckle...
Other information:
Description and operation
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one
of the most important sensors of the engine control system. Lack of CKPS signal
may cause the engine to stop. Installed on the cylinder block or the transaxle
housing, it generates alternating current by magnetic flux field made from the
sensor and the target wheel during engine runnig...
..
Categories
Seat belt warning light
![Hyundai Palisade. Seat Belt Warning Light](images/books/1/hyundai_palisade_seat_belt_warning_light_52.png)
Driver's seat belt warning
As a reminder to the driver, the seat
belt warning light will illuminate for
approximately 6 seconds each time
you place the ignition switch to the
ON position regardless of belt fastening.
At this time, if the seat belt is
not fastened a warning chime will
sound for 6 seconds.
read more