Hyundai Palisade: Surround View Monitor (SVM) / Parking/View Switch
Repair procedures
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the floor console upper cover.
(Refer to Body - "Floor Console Assembly")
|
3. |
Remove the SVM switch after loosening the mounting screws.

|
1. |
To install, reverse the removal procedure.
|
Components and components location
Components
[Ultra Optical Camera - RH/LH]
[Ultra Optical Camera - Front]
[Ultra Optical Camera - Rear]
Repair procedures
Removal
•
In case of bad quality or poor focus, be sure to check the camera
lense surface condition and foreign materials...
Other information:
Repair procedures
Disassembly
•
Be careful not to damage the parts located under the vehicle
(floor under cover, fuel filter, fuel tank and canister) when
raising the vehicle using the lift...
System setting
• Setting Blind-Spot Safety function
The driver can activate the system
by placing the ignition switch to the
ON position and by selecting 'User
Settings → Driver Assistance →
Blind-Spot Safety'
- BCA and BCW turn on and are
ready to be operated when
'Active Assist' is selected...
Categories

1. Driver's front air bag
2. Passenger's front air bag
3. Side air bag
4. Curtain air bag
5. Driver’s knee airbag
This vehicle is equipped with an
Advanced Supplemental Air Bag
System for the driver's seat and front
passenger's seats.
read more