Hyundai Palisade (LX2): Steering System / Troubleshooting
| Troubleshooting |
|
Symptom |
Probable cause |
Remedy |
|
Play in steering |
Loose yoke plug |
Retighten |
|
Loose steering gear mounting bolts |
Retighten |
|
|
Loose or worn tie rod end |
Retighten or replace as necessary |
|
|
Steering wheel operation is not smooth (Insufficient power assist) |
V-belt slippage |
Readjust |
|
Damaged V-belt |
Replace |
|
|
Low fluid level |
Replenish |
|
|
Air in the fluid |
Bleed air |
|
|
Twisted or damaged hoses |
Correct the routing or replace |
|
|
Insufficient oil pump pressure |
Repair or replace the oil pump |
|
|
Sticky flow control valve |
Replace |
|
|
Excessive internal oil pump leakage |
Replace the damaged parts |
|
|
Excessive oil leaks from rack and pinion in gear box |
Replace the damaged parts |
|
|
Distorted or damaged gear box or valve body seals |
Replace |
|
|
Steering wheel does not return properly |
Excessive turning resistance of tie rod end |
Replace |
|
Yoke plug excessively tight |
Adjust |
|
|
Tie rod and/or ball joint cannot turn smoothly |
Replace |
|
|
Loose mounting of gear box mounting bracket Worn steering shaft joint and/or |
Retighten |
|
|
Worn steering shaft joint and / or body grommet |
Correct or replace |
|
|
Distorted rack |
Replace |
|
|
Damaged pinion bearing |
Replace |
|
|
Twisted or damaged hoses |
Reposition or replace |
|
|
Damaged oil pressure control valve |
Replace |
|
|
Damaged oil pump input shaft bearing |
Replace |
|
|
Noise |
Hissing Noise in Steering Gear There is some noise with all power steering systems. One of the most common is a hissing sound when the steering wheel is turned and the car is not moving. This noise will be most evident when turning the wheel while the brakes are being applied. There is no relationship between this noise and steering performance. Do not replace the valve unless the "hissing" noise becomes extreme. A replaced valve will also make a slight noise, and is not always a solution for the condition. |
|
|
Rattling or chucking noise in the rack and pinion |
Interference with hoses from vehicle body |
Reposition |
|
Loose gear box bracket |
Retighten |
|
|
Loose tie rod end and / or ball joint |
Retighten |
|
|
Worn tie rod and / or ball joint |
Replace |
|
|
Noise in the oil pump |
Low fluid level |
Replenish |
|
Air in the fluid |
Bleed air |
|
|
Loose pump mounting bolts |
Retighten |
|
Special Service Tools Tool (Number and Name) IIIustration Use 09568-2J100 Ball joint remover Tie rod end ball joint removal 09568-4R100 Ball joint remover Lower arm ball joint removal
Service Adjustment Procedure Steering Wheel Play Inspection 1. Turn the steering wheel so that the front wheels can face straight ahead.
Other information:
Hyundai Palisade (LX2) 2020-2025 Service Manual: Power Mosfet (DATC)
Repair procedures Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until high speed.
Hyundai Palisade (LX2) 2020-2025 Service Manual: Climate Control Air Filter
Description and operation Description The climate control air filter is located in the blower unit. It eliminates foreign materials and odor. The particle filter performs a role as an odor filter as well as a conventional dust filter to ensure comfortable interior environment.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Suspension System
- Seats
- Sunshade
- New on site
- Most important about car
