Hyundai Palisade (LX2): Multifunction Switch / Specifications

Hyundai Palisade (LX2) 2020-2026 Service Manual / Body Electrical System / Multifunction Switch / Specifications

Specifications
Items
Specifications
Rated voltage
 DC 12V
Operating temperature range
 -22 to +176°F (-30°C to +80°C)
Rated load
 Dimmer & passing switch
 High : 0.2A (Relay load)
Low : 0.2A (Relay load)
Passing : 0.2A (Relay load)
Lighting switch
 Lighting : 0.2A (Relay load)
(High, Low, Auto)
Fog lamp switch
 0.2A (Relay load)
Turn signal switch
 6.6A (Lamp load)
Wiper & mist switch
 Low : 4.5A (Motor load)
High : 4.5A (Motor load)
Intermittent : 0.25 mA
Lock : Max. 28A (Motor load)
Washer : 4.0A (Motor load)
Rear wiper & washer
 Wiper : 1.0A (Relay load)
Washer : 4.0A (Motor load)

    Component 1. Steering column 2. Light switch 3. Wiper 4. Screw 5. Clock spring

    Other information:

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Ambient Temperature Sensor

    Description and operation Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Rear Corner Safety ON/OFF Switch

    Components and components location Circuit Diagram Repair procedures Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crashpad Lower Panel") 3.

    Categories

     
    Copyright © 2026 www.hpalisadelx.com - 0.0144