| Description |
| Replacement |
|
| 1. |
Remove the stopper (B) from the glove box (A).
|
| 2. |
Remove the air damper (A) from the glove box (B).
|
| 3. |
Remove the filter cover (A) by pressing the knob.
|
| 4. |
Replace the air filter (A) with a new one according to the direction
of air filter.
|
| 5. |
Install in the reverse order of removal.
|
Repair procedures Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor.
Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit.
Diagnosis with Diagnostic tool 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (Diagnostic tool). The diagnostic system (Diagnostic tool) provides the following information.
Components and components location Components [Ultra Optical Camera - RH/LH] [Ultra Optical Camera - Front] [Ultra Optical Camera - Rear] Repair procedures Removal • In case of bad quality or poor