Hyundai Palisade (LX2): Steering System / Specifications

Hyundai Palisade (LX2) 2020-2025 Service Manual / Steering System / Specifications

Specifications
Item
Specification
Type
 Electric Power Steering System
Steering gear
 Type
 Rack & Pinion
Rack stroke
 156 ± 1 mm (6.14 ± 0.0039 in)
Steering angle (Max.)
 Inner
 2WD : 35.6° - 37.5°
4WD : 35.6° - 37.6°
Outer
 2WD : 32.3°
4WD : 32.3°

Tightening torque
Item
Tightening torque (kgf.m)
N.m
kgf.m
lb-ft
Tire wheel Hub nuts
 88.3 - 107.9
 9.0 - 11.0
 65.1 - 79.6
Steering wheel lock nut
 44.1 - 49.0
 4.5 - 5.0
 32.5 - 36.2
Steering column assembly to Universal joint
 27.5 - 31.4
 2.8 - 3.2
 20.3 - 23.1
Steering column mounting bolts
 44.1 - 49.0
 4.5 - 5.0
 32.5 - 36.2
Steering column mounting nuts
 12.7 - 17.7
 1.3 - 1.8
 9.4 - 13.0
Universal joint to pinion of steering gear
 32.4 - 37.3
 3.3 - 3.8
 23.9 - 27.5
Tie rod end castle nut
 23.5 - 33.3
 2.4 - 3.4
 17.4 - 24.6
Steering gear box to sub freame
 88.3 - 107.9
 9.0 - 11.0
 65.1 - 79.6
Stabilizer link nut
 98.1 - 117.7
 10.0 - 12.0
 72.3 - 86.8
Roll rod mounting bolt & nut
 107.9 - 127.5
 11.0 -13.0
 79.6 - 94.0
Lower arm to knuckle
 98.1 - 117.7
 10.0 -12.0
 72.3 - 86.8
Sub frame mounting bolts
 (A) 44.1 - 58.8
 4.5 - 6.0
 32.5 - 43.4
(B) 156.9 - 176.5
 16.0 - 18.0
 115.7 - 130.2
Upper roll rod bracket bolt
 (A) 107.9 - 127.5
 11.0 - 13.0
 79.6 - 94.0
(B) 49.0 - 63.7
 5.0 - 6.5
 36.2 - 47.0

    Special Service Tools Tool (Number and Name) IIIustration Use 09568-2J100 Ball joint remover Tie rod end ball joint removal 09568-4R100 Ball joint remover Lower arm ball joint removal

    Other information:

    Hyundai Palisade (LX2) 2020-2025 Service Manual: Repair procedures

    Refrigerant System Service Basics (R-134a) Refrigerant Recovery Use only service equipment that is U.L-listed and is certified to meet the requirements of SAE J2210 to remove HFC-134a(R-134a) from the air conditioning system.

    Hyundai Palisade (LX2) 2020-2025 Service Manual: Repair procedures

    Inspection Tolerance Compensation Tolerance compensation compensates for the error margins of around view video that occur due to the installation tolerance when the four cameras that comprise the SVM system are installed. You must carry out tolerance compensation if you do any of the following.

    Categories

     
    Copyright © 2025 www.hpalisadelx.com - 0.0199