Hyundai Palisade (LX2): Driver Attention Warning (DAW) system / Resetting the System
- The last break time is set to 00:00 and the driver's attention level is set to 5 (very attentive) when the driver resets the Driver Attention Warning (DAW) system.
- The Driver Attention Warning
(DAW) system resets in the following
situations.
- The engine is turned OFF.
- The driver unfastens the seat belt and then opens the driver's door.
- The vehicle is stopped for more than 10 minutes. - The Driver Attention Warning (DAW) system operates again, when the driver restarts driving.
System setting The Driver Attention Warning can be activated from the User Settings menu in the cluster LCD display by following the procedure below.
System Standby The Driver Attention Warning (DAW) system enters the ready status and displays the 'Standby' screen in the following situations. - The system is unable to collect data to monitor the driver's driving conditions.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Ambient Temperature Sensor
Description and operation Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.
Hyundai Palisade (LX2) 2020-2026 Service Manual: Parking/View Switch
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console upper cover. (Refer to Body - "Floor Console Assembly") 3.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Repair procedures
- Body Electrical System
- Emergency liftgate safety release
- New on site
- Most important about car
