Hyundai Palisade (LX2): Forward Collision-Avoidance Assist (FCA) system / Limitations of the System
The Forward Collision Avoidance Assist (FCA) system is designed to monitor the vehicle ahead or a pedestrian on the roadway through radar signals and camera recognition to warn the driver that a collision is imminent, and if necessary, apply emergency braking.
In certain situations, the radar sensor or the camera may not be able to detect the vehicle, pedestrian ahead. In these cases, the FCA system may not operate normally. The driver must pay careful attention in the following situations where the FCA operation may be limited.
Check Forward Collision- Avoidance Assist system When FCA is not working properly, the FCA warning light () will illuminate and the warning message will appear for a few seconds.
The sensor may be limited when: The system may not operate for 15 seconds after the engine is started or the camera is initialized The radar sensor or camera is covered with a foreign object or debris The camera lens is contaminated due to tinted, filmed or coated windshield, damaged glass, or stuck of foreign matter (sticker, bug, etc.
Other information:
Hyundai Palisade (LX2) 2020-2025 Service Manual: Immobilizer Control Unit
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to Body - "Glove Box Housing Cover") 3.
Hyundai Palisade (LX2) 2020-2025 Service Manual: Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until it reaches high speed.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- Lift and Support Points
- Suspension System
- Towing Service
- New on site
- Most important about car
