Hyundai Palisade (LX2): Body Side Molding / Front Mud Guard

Repair procedures

Replacement
Hyundai Palisade. Repair procedures   
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
•
Put on gloves to prevent hand injuries.
1.
Loosen the mounting clips, screws and, remove the front mud guard (A).

Hyundai Palisade. Repair procedures

2.
To install, reverse removal procedure.
Hyundai Palisade. Repair procedures   
•
Replace any damaged clips (or pin-type retainers).

    Repair procedures Replacement    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

    Repair procedures Replacement    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

    Other information:

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Repair procedures

    Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim (Refer to Body - "Luggage Side Trim ") 3. Separate the rear mode actuator connector (A), loosen the mounting screws and remove the rear mode ac

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Repair procedures

    Removal SVM Rear Camera    • In case of bad quality or poor focus, be sure to check the camera lense surface condition and foreign materials.

    Categories

     
    Copyright © 2026 www.hpalisadelx.com - 0.0247