| Replacement |
| 1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
|
| 2. |
Loosen the mounting screws and remove the front door inside handle (A).
|
| 3. |
To install, reverse removal procedure.
|
Components and components location Component Location 1. Front door trim Repair procedures Replacement • Put on gloves to prevent hand injuries.
Components and components location Component Location 1. Front door window glass Repair procedures Replacement • Put on gloves to prevent hand injuries.
Components and components location Components Location 1. Blower unit assembly Components 1. Intake seal 2. Intake upper case 3. Intake actuator 4. Intake door 5.
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim (Refer to Body - "Luggage Side Trim ") 3. Separate the rear mode actuator connector (A), loosen the mounting screws and remove the rear mode ac