
â– Front radar

â– Front camera
In order for the FCA system to operate properly, always make sure the sensor cover or sensor is clean and free of dirt, snow, and debris.
Dirt, snow, or foreign substances on the sensor cover or sensor may adversely affect the sensing performance of the sensor.
NOTICE
NOTICE
Information
Have the system checked by an authorized HYUNDAI dealer when:
Warning message and warning light

Forward Collision-Avoidance Assist (FCA) system disabled. Radar blocked
When the sensor cover is covered with dirt, snow, or debris, the FCA system operation may not be able to detect other vehicles. If this occurs, a warning message will appear on the LCD display.
The system will operate normally when such dirt, snow or debris is removed.
FCA may not properly operate in an area (e.g. open terrain) where any objects or vehicles are not detected after turning on the engine.
WARNING
The FCA system may not activate according to road conditions, inclement weather, driving conditions or traffic conditions.
FCA produces warning messages, warning alarms, and emergency braking based on the level of risk of a frontal collision, such as when a vehicle ahead suddenly brakes, or when the system detects that a collision with a pedestrian is imminent.
Check Forward Collision- Avoidance Assist system When FCA is not working properly, the FCA warning light () will illuminate and the warning message will appear for a few seconds.
Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Specifications Specifications [BCW, BCA] Items Blind-Spot Collision Warning (BCW) Blind-Spot Collision- Avoidance Assist (BCA) Rated voltage DC 12V Operating voltage 9V - 16V Operating speed 30 km/h