Hyundai Palisade (LX2): Maintenance / Climate control air filter

Filter Inspection

The climate control air filter should be replaced according to the Maintenance Schedule. If the vehicle is operated in severely air-polluted cities or on dusty rough roads for a long period and/or if transporting pets or occupants smoke inside the vehicle, then it should be inspected more frequently and replaced sooner. Replace the climate control air filter by following the procedure below and be careful to avoid damaging other components.

Hyundai Palisade. Climate control air filter

1. With the glove box open, remove the stoppers on both sides to allow the glove box to hang freely on the hinges.

Hyundai Palisade. Climate control air filter

2. Remove the support rod (1).

Hyundai Palisade. Climate control air filter

3. Remove the climate control air filter case while pressing the lock on right side of the cover.

Hyundai Palisade. Climate control air filter

4. Replace the climate control air filter.

5. Reassemble in the reverse order of disassembly.

NOTICE

Install a new climate control air filter in the correct direction with the arrow symbol (↓) facing downwards, to prevent noise and reduce effectiveness.

    Filter Replacement The air cleaner filter can be cleaned for inspection using compressed air. Do not attempt to wash or to rinse it, as water will damage the filter.

    Blade Inspection Contamination of either the windshield or the wiper blades with foreign matter can reduce the effectiveness of the windshield wiper functionality.

    Other information:

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Evaporator Temperature Sensor

    Description and operation Description The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling. Repair procedures Inspection 1.

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Heater Core

    Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater - "Heater Unit") 3.

    Categories

     
    Copyright © 2026 www.hpalisadelx.com - 0.0123