Hyundai Palisade (LX2): Rear Seats / Armrest, Rear occupant alert system

Armrest (2nd row, 8 passengers vehicle)

Hyundai Palisade. Armrest, Rear occupant alert system

The armrest is located in the center of the rear seat. Use the strap in the center of the armrest to pull it down.

Armrest (2nd row, 7 passengers vehicle)

Hyundai Palisade. Armrest, Rear occupant alert system

Pull the armrest down from the seatback to use it.

Rear occupant alert system (if equipped)

This function alerts the driver when exiting the vehicle to check the 2nd row seat.

If the rear doors are open prior to driving the vehicle, after driving when the vehicle is turned off, a warning message appears in the cluster to give a first warning. If the movement is detected in the 2nd row seat after you lock all doors, a second warning alerts you.

Make sure to check for passengers in the 2nd row seat before you get out.

    While folding or unfolding the 3rd row seat, when a consistent force is detected, the seat returns to its original position or stops operation. However, this function may not work when the detected resistance is below a specific level or the seat is almost folded or unfolded.

    The vehicle's front and rear seats have adjustable head restraints. The head restraints provide comfort for passengers, but more importantly they are designed to help protect passengers from whiplash and other neck and spinal injuries during an accident, especially in a rear impact collision.

    Other information:

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Temperature Control Actuator

    Description and operation Description The heater unit includes mode control actuator and temperature control actuator. The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows.

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Repair procedures

    Inspection Tolerance Compensation Tolerance compensation compensates for the error margins of around view video that occur due to the installation tolerance when the four cameras that comprise the SVM system are installed. You must carry out tolerance compensation if you do any of the following.

    Categories

     
    Copyright В© 2026 www.hpalisadelx.com - 0.027