Hyundai Palisade: TRIP Computer (Cluster type A and type B) / Drive Info display

Hyundai Palisade (LX2) 2020-2025 Owner's Manual / Convenient Features of Your Vehicle / TRIP Computer (Cluster type A and type B) / Drive Info display

Hyundai Palisade. Drive Info display

This display shows the trip distance (1), the average fuel economy (2), and the total driving time (3).

The information is combined for each ignition cycle. However, when the engine has been OFF for 4 hours or longer the Drive Info screen will reset.

To reset the details, press and hold the OK button when viewing the Drive Info. The trip distance, the average fuel economy, and total driving time will reset simultaneously.

The driving information will continue to be counted while the engine is still running (for example, when the vehicle is in traffic or stopped at a stop light).

Information

The vehicle must be driven for a minimum of 0.19 miles (300 meters) since the last ignition key cycle before the average fuel economy will be recalculated.

Accumulated Info display

This display shows the accumulated trip distance (1), the average fuel economy (2), and the total driving time (3). The information is accumulated starting from the last reset...

Digital speedometer, Smart shift

Digital speedometer This digital speedometer display shows the speed of the vehicle. Smart shift This mode displays the currently selected drive mode...

Other information:

Hyundai Palisade (LX2) 2020-2025 Owner's Manual: Tilting the Sunroof (Front)

Tilt the sunroof open: Push the sunroof control lever upward until the sunroof moves to the desired position. To close the sunroof: Push the sunroof control lever forward until the sunroof closes. Automatic reverse If the sunroof senses any to an obstacle while it is closing automatically, it will reverse direction then stop to allow the object to be cleared...

Hyundai Palisade (LX2) 2020-2025 Owner's Manual: To resume Smart Cruise Control set speed, To turn Cruise Control off

To resume Smart Cruise Control set speed If any method other than the cruise toggle switch was used to cancel cruising speed and the system is still activated, the cruising speed will automatically resume when you push the toggle switch up (RES+) or down (SET-)...