Hyundai Palisade (LX2): Horn / Components and components location
| Component Location |
| 1. Horn switch 2. Horn relay (Engine room compartment) 3. Horn (Low pitch) |
4. Horn (High pitch) 5. Clock spring |
Removal 1. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") 2. Remove the bolts and disconnect the horn connectors (C), then remove the high pitch horn (B) and low pitch horn (A).
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Photo Sensor
Description and operation Description The photo sensor is located at the center of the defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving portion, generates an electromotive force in proportion to the amount of radiation received wh
Hyundai Palisade (LX2) 2020-2026 Service Manual: Power Mosfet (DATC)
Repair procedures Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until high speed.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- ISG (Idle Stop and Go) system
- Rear Bumper Cover
- Lift and Support Points
- New on site
- Most important about car
