Hyundai Palisade: Air conditioning System / Ambient Temperature Sensor

Hyundai Palisade (LX2) 2020-2024 Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Ambient Temperature Sensor

Description and operation

Description

The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.

The sensor output will be used for discharge temperature control, temperature regulation door control, blower motor level control, mix mode control and in-car humidity control.

•	If the ambient temperature is below 1.0°C (33.8°F), the A/C compressor will stop.

•	The compressor will operate manually.

Photo Sensor

Description and operation Description The photo sensor is located at the center of the defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode...

Auto Defogging Sensor

Description and operation Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging...

Other information:

Hyundai Palisade (LX2) 2020-2024 Service Manual: Components and components location

Hyundai Palisade (LX2) 2020-2024 Service Manual: Door Scuff Trim

Components and components location Component Location 1. Front door scuff trim 2. Rear door scuff trim Repair procedures Replacement [Front door scuff trim] • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...