Components and components location Components 1. Gravity Side Impact Sensor [G-SIS (B-Pillar)] 2. Gravity Side Impact Sensor [G-SIS (C-Pillar)] 3.
Components and components location Components 1. Driver Airbag (DAB) 2. Steering Wheel 3. Clock Spring Description and operation Description The Driver Airbag (DAB) is installed in the steering wheel and electrically connected to SRSCM via the clock spring.
Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim (Refer to Body - "Luggage Side Trim ") 3. Separate the rear blower motor connector (A), loosen the mounting screws and remov
Inspection Tolerance Compensation Tolerance compensation compensates for the error margins of around view video that occur due to the installation tolerance when the four cameras that comprise the SVM system are installed. You must carry out tolerance compensation if you do any of the following.