Hyundai Palisade (LX2): Remote Key / Unlocking your vehicle

To unlock your vehicle :

1.Press the Door Unlock button (2) on the remote key.

2.The driver's door will unlock. The hazard warning lights will blink two times.

Two Press Unlock Feature

The priority for unlocking the driver door only, or unlocking all the doors with one press may be adjusted in the User Settings mode in the cluster LCD display.

The Two Press Unlock feature, when enabled, will require the user to press the door unlock button once for driver door only and twice for unlocking all the doors.

Select or Deselect the Two Press Unlock feature in the User Settings mode in the cluster LCD display. The option can be found under the following menu:

User Settings ➞ Door ➞ Two Press Unlock

The Two Press Unlock feature can also be enabled or disabled by pressing the door lock and unlock buttons simultaneously on the Key FOB:

Press and hold both the Door Lock button and the Door Unlock button simultaneously until the hazard warning lights blink.

This will enable or disable the Two Press Unlock feature. Repeat this procedure to enable/disable the mode again.

Information

After unlocking the doors, the doors will automatically relock after 30 seconds unless a door is opened.

    ■ Type A ■ Type B Your HYUNDAI uses a remote key, which you can use to lock or unlock the driver and passenger doors or the rear liftgate. 1. Door Lock 2.

    To unlock the liftgate : 1.Press and hold the Liftgate Unlock button (3) on the remote key for more than one second. 2.The hazard warning lights will blink two times and the liftgate will open.

    Other information:

    Hyundai Palisade (LX2) 2020-2025 Service Manual: Description and operating principle

    Description and Operation Wireless Power Charger System During ACC or IG ON, battery voltage is supplied to the wireless power charger system to transmit an output of 5 W to mobile phone. Mobile phones certified with the wireless charging standard WPC (Qi 1.

    Hyundai Palisade (LX2) 2020-2025 Service Manual: Warning Indicator

    Components and components location Components 1. Warning indicator 2. SVM camera Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2.

    Categories

     
    Copyright © 2025 www.hpalisadelx.com - 0.0113