Hyundai Palisade: Body (Interior and Exterior) / Trunk Trim
Components and components location
Component Location
1. Rear pillar trim
2. Tailgate fillar trim
Repair procedures
Replacement
[Rear pillar trim]
•
When removing with a flat-tip screwdriver or remover, wrap protective
tape around the tools to prevent damage to components...
Replacement
•
When removing with a flat-tip screwdriver or remover, wrap protective
tape around the tools to prevent damage to components...
Other information:
1. Start the engine.
2. Set the mode to the desired position.
To improve the effectiveness of
heating and cooling, select the
mode according to the following:
- Heating:
- Cooling:
3. Set the temperature control to the
desired position.
4. Set the air intake control to Fresh
mode or Recirculation mode position...
System setting
• Setting Blind-Spot Safety function
The driver can activate the system
by placing the ignition switch to the
ON position and by selecting 'User
Settings → Driver Assistance →
Blind-Spot Safety'
- BCA and BCW turn on and are
ready to be operated when
'Active Assist' is selected...
Categories
![Hyundai Palisade. in the Front Passenger's Seat](images/books/1/hyundai_palisade_in_the_front_passenger_s_seat_109.png)
Even though your vehicle is equipped
with the OCS, never install a child
restraint in the front passenger's seat.
An inflating air bag can forcefully
strike a child or child restraint resulting
in serious or fatal injury.
read more