Hyundai Palisade: Tire Pressure Monitoring System (TPMS) / TPMS Malfunction
Indicator
The TPMS Malfunction Indicator will
illuminate after it blinks for approximately
one minute when there is a
problem with the Tire Pressure
Monitoring System.
Have the system checked by an
authorized HYUNDAI dealer as soon
as possible.
NOTICE
If there is a malfunction with the
TPMS, the individual tire pressures
in the cluster LCD display
will not be available. Have the system
checked by an authorized
HYUNDAI dealer as soon as possible.
NOTICE
The TPMS Malfunction Indicator
may illuminate after blinking for
one minute if the vehicle is near
electric power supply cables or
radio transmitters such as police
stations, government and public
offices, broadcasting stations,
military installations, airports,
transmitting towers, etc.
Additionally, the TPMS Malfunction
Indicator may illuminate if snow
chains are used or electronic
devices such as computers, chargers,
remote starters, navigation,
etc. This may interfere with normal
operation of the TPMS.
Low Tire Pressure
LCD Display with
Position Indicator
When the tire pressure monitoring
system warning indicators are illuminated
and the warning message is
displayed on the cluster LCD display,
one or more of your tires is significantly
under-inflated...
If you have a flat tire, the Low Tire
Pressure and LCD position indicator
will come on. Have the flat tire
repaired by an authorized HYUNDAI
dealer as soon as possible or
replace the flat tire with the spare
tire...
Other information:
Specifications
Specifications
[BCW, BCA]
Items
Blind-Spot Collision Warning (BCW)
Blind-Spot Collision- Avoidance Assist (BCA)
Rated voltage
DC 12V
Operating voltage
9V - 16V
Operating speed
30 km/h - 255 km/h
60 km/h - 180 km/h
Sensible distance
70m
Curvature radius
Start : More than 100m
Start : More than 625m
Stop : Less than 70m
Stop : Less than 588m
Frequency
76 - 77 GHz
Numbers
2EA
[RCCW, RCCA]
Items
Rear Cross-Traffic Collision Warning System (RCCW)
Rear Cross-Traffic Collision- Avoidance Assist (RCCA)
Rated voltage
DC 12V
Operating voltage
9V ~ 16V
Operating speed
0 km/h ~ 10 km/h
0...
To set Vehicle-to-Vehicle
Distance
When the Smart Cruise Control system
is ON, you can set and maintain
the distance from the vehicle ahead
of you without pressing the accelerator
or brake pedal.
Each time the button is pressed, the
vehicle to vehicle distance changes
as follows:
For example, if you drive at 56 mph
(90 km/h), the distance is maintained
as follows:
Distance 4 - approximately 172 feet
Distance 3 - approximately 130 feet
Distance 2 - approximately 106 feet
Distance 1 - approximately 82 feet
Information
The distance is set to the last set distance
when the system is used for the
first time after starting the engine...