Hyundai Palisade: Smart Cruise Control Speed / To temporarily accelerate with
the Smart Cruise Control on, Smart Cruise Control set speed
will be temporarily canceled
when
To temporarily accelerate with
the Smart Cruise Control on
If you want to speed up temporarily
when the Smart Cruise Control is on,
depress the accelerator pedal.
Increased speed will not interfere
with Smart Cruise Control operation
or change the set speed.
To return to the set speed, take your
foot off the accelerator pedal.
If you push the toggle switch down
(SET-) at increased speed, the cruising
speed will be set again corresponding
to the pedal position.
CAUTION
Be careful when accelerating
temporarily, because the speed
is not controlled automatically
at this time even if there is a
vehicle in front of you.
Smart Cruise Control set speed
will be temporarily canceled
when
![Hyundai Palisade. when](images/to_temporarily_accelerate_with_the_smart_cruise_control_on_smart_cruise_control_set_speed_will_be_temporarily_canceled_when-305/1/hyundai_palisade_when_662.png)
Canceled manually
- Depressing the brake pedal.
- Pushing the CANCEL button located
on the steering wheel.
The Smart Cruise Control turns off
temporarily when the Set Speed and
Vehicle-to-Vehicle Distance indicator
on the cluster LCD display turns off.
The cruise indicator is illuminated
continuously.
Canceled automatically
- The driver's door is opened.
- The vehicle is shifted to N (Neutral),
R (Reverse) or P (Park).
- The EPB (Electronic Parking Brake)
is applied.
- The vehicle speed is over 110 mph
(170 km/h).
- The vehicle stops on a steep incline.
- The ESC (Electronic Stability
Control), TCS (Traction Control
System) or ABS is operating.
- The ESC is turned off.
- The sensor or the cover is dirty or
blocked with foreign matter.
- The vehicle is stopped for a certain
period of time.
- The vehicle stops and goes repeatedly
for a long period of time.
- The accelerator pedal is continuously
depressed for a long period
of time.
- The engine stops or the engine
performance is abnormal.
- Engine rpm is in the red zone.
- The driver starts driving by pushing
the toggle switch up (RES+)/down
(SET-) or depressing the accelerator
pedal, after the vehicle is
stopped by the Smart Cruise
Control system with no other vehicle
ahead.
- The driver starts driving by pushing
the toggle switch up (RES+)/down
(SET-) or depressing the accelerator
pedal, after stopping the vehicle
with a vehicle stopped far away in
front.
- The Forward Collision-Avoidance
Assist (FCA) is activated.
- The engine is stopped by ISG (Idle
Stop & Go) (if equipped).
Each of these actions will cancel the
Smart Cruise Control operation. The
Set Speed and Vehicle-to-Vehicle
Distance on the cluster LCD display
will go off.
In a condition the Smart Cruise
Control is cancelled automatically,
the Smart Cruise Control will not
resume even though the RES+ or
SET- toggle switch is pushed.
Also, if the Smart Cruise Control is
canceled automatically while the
vehicle is at a standstill, EPB
(Electronic Parking Brake) will be
applied.
Information
If the Smart Cruise Control is canceled
during a situation that is not
described above, have the system
checked by an authorized HYUNDAI
dealer.
Smart Cruise Control canceled
![Hyundai Palisade. when](images/to_temporarily_accelerate_with_the_smart_cruise_control_on_smart_cruise_control_set_speed_will_be_temporarily_canceled_when-305/1/hyundai_palisade_when_663.png)
If the system is canceled, the warning
chime will sound and a message
will appear for a few seconds.
You must adjust the vehicle speed by
depressing the accelerator or brake
pedal according to the road and driving
conditions.
Always check the road conditions.
Do not rely on the warning chime.
Follow either of these procedures:
Push the toggle switch down
(SET-), and release it immediately.
The cruising speed will decrease
by 1 mph (1 km/h) each time you
move the toggle switch down in
this manner...
To resume Smart Cruise Control
set speed
If any method other than the cruise
toggle switch was used to cancel
cruising speed and the system is still
activated, the cruising speed will
automatically resume when you
push the toggle switch up (RES+) or
down (SET-)...
Other information:
Electric Power Steering
(EPS) Warning Light
This warning light illuminates:
When the ignition is moved to ON,
the warning light illuminates for
about 3 seconds and turns off
automatically if no problem.
When the warning light illuminates
while driving, it indicates that there
is a problem with the electric power
steering system...
Make sure to adjust the side view
mirrors to your desired position
before you begin driving.
Your vehicle is equipped with both
left-hand and right-hand side view
mirrors. The mirrors can be adjusted
remotely with the remote switch. The
side view mirrors can be folded to
help prevent damage when going
through an automatic car wash or
when passing through a narrow
street...