Hyundai Palisade: Installing a Child Restraint System (CRS) / Securing a child restraint with the LATCH anchors system

Hyundai Palisade (LX2) 2020-2024 Owner's Manual / Safety System of Your Vehicle / Child restraint system (CRS) / Installing a Child Restraint System (CRS) / Securing a child restraint with the LATCH anchors system

To install a LATCH-compatible child restraint in either of the rear outboard seating positions:

1. Move the seat belt buckle away from the lower anchors.

2. Move any other objects away from the anchors that could prevent a secure connection between the child restraint and the lower anchors.

3. Place the child restraint on the vehicle seat, then attach the seat to the lower anchors according to the instructions provided by the child restraint manufacturer.

4. Follow the child restraint instructions for properly adjusting and tightening the lower attachments on the child restraint to the lower anchors.

WARNING

Take the following precautions when using the LATCH system:

  • Read and follow all installation instructions provided with your child restraint system.
  • To prevent the child from reaching and taking hold of unretracted seat belts, buckle all unused rear seat belts and retract the seat belt webbing behind the child. Children can be strangled if a shoulder belt becomes wrapped around their neck and the seat belt tightens.
  • NEVER attach more than one child restraint to a single anchor. This could cause the anchor or attachment to come loose or break.
  • Always have the LATCH system inspected by your authorized HYUNDAI dealer after an accident. An accident can damage the LATCH system and may not properly secure the child restraint.

NOTICE

The recommended weight for the LATCH system is under 65 lb (30 kg).

How to determine an appropriate child restraint weight:

Child weight + Child restraint weight < 65 lb (30kg)

    Lower Anchors and Tether for Children (LATCH System)

    The LATCH system holds a child restraint during driving and in an accident. This system is designed to make installation of the child restraint easier and reduce the possibility of improperly installing your child restraint...

    Securing a child restraint seat with "Tether Anchor" system

    ■ 2nd row passenger seat ■ 3rd row passenger seat First secure the child restraint with the LATCH lower anchors or the seat belt. If the child restraint manufacturer recommends that the top tether strap be attached, attach and tighten the top tether strap to the top tether strap anchor...

    Other information:

    Hyundai Palisade (LX2) 2020-2024 Owner's Manual: Headlamp, Parking lamp, Daytime Running Light, Turn signal lamp and Side marker


    Type A (1) Turn signal lamp (2) Daytime running light / Parking lamp (3) Side marker lamp (4) Headlamp (Low) (5) Headlamp (High) (6) Side reflex reflector Daytime running light (DRL), parking lamp, turn signal lamp and side marker lamp If the LED lamp does not operate, have the system checked by an authorized HYUNDAI dealer...

    Hyundai Palisade (LX2) 2020-2024 Service Manual: Power Mosfet (DATC)


    Repair procedures Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until high speed...

    Categories

    Do Not Install a Child Restraint in the Front Passenger's Seat

    Hyundai Palisade. in the Front Passenger's Seat

    Even though your vehicle is equipped with the OCS, never install a child restraint in the front passenger's seat. An inflating air bag can forcefully strike a child or child restraint resulting in serious or fatal injury.

    read more


     
    Copyright © 2024 www.hpalisadelx.com