Hyundai Palisade: Driving Your Vehicle / Rear Cross-Traffic Collision Warning (RCCW)/ Rear Cross-Traffic Collision-Avoidance Assist (RCCA)

Hyundai Palisade (LX2) 2020-2025 Owner's Manual / Driving Your Vehicle / Rear Cross-Traffic Collision Warning (RCCW)/ Rear Cross-Traffic Collision-Avoidance Assist (RCCA)

System Description

Rear Cross-Traffic Collision Warning (RCCW) system

Hyundai Palisade. (RCCA)

The Rear Cross-Traffic Collision Warning (RCCW) system uses radar sensors to monitor the approaching cross traffic from the left and right side of the vehicle when your vehicle is in reverse.

The blind spot detection range varies relative to the approaching vehicle speed.

Rear Cross-Traffic Collision- Avoidance Assist (RCCA) system

The Rear Cross-Traffic Collision- Avoidance Assist (RCCA) system monitors approaching cross traffic from the left and right side of the vehicle when your vehicle is in reverse.

The Rear Cross-Traffic Collision- Avoidance Assist (RCCA) system may activate the Electronic Stability Control (ESC) in accordance with a possible collision with an approaching vehicle. It is to lower the possible collision risk or mitigate the possible collision damage.

WARNING

  • Always be aware of road and traffic conditions while driving and be alert for unexpected situations even though the Rear Cross-Traffic Collision Warning system and Rear Cross-Traffic Collision- Avoidance Assist system are operating.
  • The Rear Cross-Traffic Collision Warning system and Rear Cross-Traffic Collision- Avoidance Assist system are supplemental systems to assist you. Do not entirely rely on the systems. Always pay attention, while driving, for your safety.
  • The Rear Cross-Traffic Collision Warning system and Rear Cross-Traffic Collision- Avoidance Assist system are not substitutes for proper and safe driving. Always drive safely and use caution when backing up the vehicle.

Limitations of the System

The driver must be cautious in the below situations because the system may not detect other vehicles or objects in certain circumstances: When a trailer or carrier is installed...

System Setting and Operation

System setting Setting Parking Safety function The driver can activate the systems by placing the ignition switch to the ON position and by selecting 'User Settings → Driver Assistance → Parking Safety → Rear Cross- Traffic Safety'...

Other information:

Hyundai Palisade (LX2) 2020-2025 Owner's Manual: High Beam Assist (HBA), AUTO HOLD, Cruise, SPORT Mode indicator lights


High Beam Assist (HBA) indicator light This indicator light illuminates : When the high-beam is on with the light switch in the AUTO light position. If your vehicle detects oncoming or preceding vehicles, the High Beam Assist (HBA) system will switch the high beam to low beam automatically...

Hyundai Palisade (LX2) 2020-2025 Owner's Manual: To Activate the ISG System


Prerequisite for activation The ISG system operates in the following situations. - The driver's seatbelt is fastened. - The driver's door and the hood are closed. - The brake vacuum pressure is adequate. - The battery is sufficiently charged. - The outside temperature is between 14 °F and 95 °F (-10 °C and 35 °C)...

Categories

Air Bag Warning Labels

Hyundai Palisade. Air Bag Warning Labels

Air bag warning labels, required by the U.S. National Highway Traffic Safety Administration (NHTSA), are attached to alert the driver and passengers of potential risks of the air bag system. Be sure to read all of the information about the air bags that are installed on your vehicle in this Owners Manual.

read more


 
Copyright © 2025 www.hpalisadelx.com