Hyundai Palisade (LX2): Head Restraints / Rear seat head restraints

Hyundai Palisade. Rear seat head restraints

The rear seats are equipped with head restraints in all the seating positions for the passenger's safety and comfort.

CAUTION

  • Adjust the head restraint so the middle of the head restraint is at the same height as the height of the top of the eyes.

Hyundai Palisade. Rear seat head restraints

  • When seated on the rear seat, do not adjust the height of the head restraint to the lowest position.

Hyundai Palisade. Rear seat head restraints

Adjusting the height up and down

To raise the head restraint:

1. Pull it up to the desired position (1).

To lower the head restraint:

1. Push and hold the release button (2) on the head restraint support.

2. Lower the head restraint to the desired position (3).

Hyundai Palisade. Rear seat head restraints

Removal/Reinstallation

To remove the head restraint:

1. Raise the head restraint as far as it can go.

2. Press the head restraint release button (1) while pulling the head restraint up (2).

To reinstall the head restraint:

1. Put the head restraint poles into the holes (3) while pressing the release button (1).

2. Adjust the head restraint to the appropriate height.

    The vehicle's front and passenger's seats are equipped with adjustable head restraints for the passengers safety and comfort. Adjusting the height up and down To raise the head restraint: 1.

    The headrest will fold down automatically when folding the seatback. To fold the headrest manually: - Pull the strap. To unfold the headrest manually: - Raise the headrest manually.

    Other information:

    Hyundai Palisade (LX2) 2020-2026 Service Manual: A/C Pressure Transducer

    Description and operation Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.

    Hyundai Palisade (LX2) 2020-2026 Service Manual: Repair procedures

    Variant Coding    When you need variant coding: – Replace Front View Camera with a new one ※ EOL Variant Coding and calibration required for new replacement Front View Camera Variant Coding

    Categories

     
    Copyright © 2026 www.hpalisadelx.com - 0.0133