| Component Location |

| 1. Rear door trim |
Components 1. Rear door trim 2. Rear door module 3. Rear door panel 4. Rear door delta inner cover 5. Rear door door side weatherstrip 6.
Repair procedures Replacement 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2.
Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater and blower assembly. (Refer to Heater - "Heater Unit") 3.
Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.