Hyundai Palisade: Hood / Hood Latch Release Handle

Hyundai Palisade (LX2) 2020-2025 Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle

Components and components location

Component Location

Hyundai Palisade. Components and components location

1. Hood latch release handle

Repair procedures

Replacement

1.	After loosening the hood hinge (A) mounting bolts, remove the hood assembly (B).

To install, reverse removal procedure.

•	Make sure the hood latch cable is connected properly.

•	Make sure the hood locks / unlocks and opens / closes properly.

Hood Weatherstrip

Repair procedures Replacement 1. Remove the hood weatherstrip (A). • Be careful not to scratch the hood weatherstrip...

Other information:

Hyundai Palisade (LX2) 2020-2025 Owner's Manual: In Case of an Emergency While Driving

If the Engine Stalls While Driving Reduce your speed gradually, keeping a straight line. Move cautiously off the road to a safe place. Turn on your hazard warning flasher. Try to start the engine again. If your vehicle will not start, contact an authorized HYUNDAI dealer or seek other qualified assistance...

Hyundai Palisade (LX2) 2020-2025 Owner's Manual: Check Tire Pressure

You can check the tire pressure in the Assist mode on the cluster. Refer to the "LCD Display Mode" section in chapter 3. A "Drive to display" message will appear for the first few minutes of driving after initial engine start up. If the tire pressure is not displayed after a few minutes of driving, check the tire pressures...