Hyundai Palisade: Seat Belts / Care of Seat Belts

Hyundai Palisade (LX2) 2020-2024 Owner's Manual / Safety System of Your Vehicle / Seat Belts / Care of Seat Belts

Seat belt systems should never be disassembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse.

Periodic inspection

All seat belts should be inspected periodically for wear or damage of any kind. Any damaged parts should be replaced as soon as possible by an authorized HYUNDAI dealer.

Keep belts clean and dry

Seat belts should be kept clean and dry. If belts become dirty, they can be cleaned by using a mild soap solution and warm water. Bleach, dye, strong detergents or abrasives should not be used because they may damage and weaken the fabric.

When to replace seat belts

The entire seat belt assembly or assemblies should be replaced if the vehicle has been involved in an accident. This should be done even if no damage is visible. Additional questions concerning seat belt operation should be directed to an authorized HYUNDAI dealer.

    Additional Seat Belt Safety Precautions

    Seat belt use during pregnancy The seat belt should always be used during pregnancy. The best way to protect your unborn child is to protect yourself by always wearing the seat belt...

    Child restraint system (CRS)

    ..

    Other information:

    Hyundai Palisade (LX2) 2020-2024 Owner's Manual: Operating Door Locks from Outside the Vehicle


    Mechanical key [A] : Unlock, [B] : Lock First, pull the outside door handle (1) and push the hook (2) located inside of outside door handle by using the mechanical key. And remove the cover (3) and lower the cover downward not to be damaged. NOTICE Be careful not to damage the cover while removing it or misplace it after removing it...

    Hyundai Palisade (LX2) 2020-2024 Service Manual: Position Sensor


    Specifications Specification Item Specification Power supply (V) 4.5 - 5.5V Output type Shifting range Non-contact (2 channel PWM signal) Description and operation Description Output position signal(P,R,N,D) by the actuator operation to the controller (SBW Control Unit_SCU)...

    Categories

    Locking your vehicle

    Hyundai Palisade. Locking your vehicle

    To lock your vehicle using the door handle button or the Smart Key:

    1.Make sure all doors, the hood and the liftgate are closed.

    2.Make sure you have the smart key in your possession.

    read more


     
    Copyright © 2024 www.hpalisadelx.com