Hyundai Palisade: Automatic Transmission / LCD display message

Hyundai Palisade (LX2) 2020-2024 Owner's Manual / Driving Your Vehicle / Automatic Transmission / LCD display message

Shifting conditions not met

The warning message appears on the LCD display, when engine RPM is too high, or when driving speed is too fast to shift the gear.

We recommend you decrease the engine speed or slow down before shifting the gear.

Press brake pedal to change gear

The warning message appears on the LCD display, when the brake pedal is not depressed while shifting the gear.

We recommend you to depress the brake pedal and then shift the gear.

Shift to P after stopping

The warning message appears on the LCD display, when the gear is shifted to P (Park) while the vehicle is moving.

Stop the vehicle before shifting to P (Park).

PARK engaged

The warning message appears on the LCD display, when the gear is shifted to P (Park) while the vehicle is moving.

Stop the vehicle before shifting to P (Park).

Press and hold OK button to stay in Neutral when vehicle is Off

The warning message appears on the LCD display, when pushing the N(Neutral) button. If you want to stay N(Neutral) after turning off the engine, press and hold the “OK” button on the steering wheel more than 1 second.

Vehicle will stay in (N). Change gear to cancel

The warning message appears on the LCD display, when pushing the "OK" button on the steering wheel after the message ("Press and hold OK button to stay in Neutral when vehicle is Off") appears on the cluster LCD display. The gear stays in N(Neutral) position after turning off the engine.

NEUTRAL engaged

The message appears on the LCD display, when the N (Neutral) position is engaged.

Gear already selected

The message appears on the LCD display, when pushing the current shift button again.

Shift button held down

The warning message appears on the LCD display, when the shift button is pressed continuously or the shift button does not properly operate. Clean the surroundings of gear shift button.

If this message appears again, we recommend you to have the vehicle inspected by an authorized HYUNDAI dealer.

Shifter system malfunction

The warning message appears on the LCD display, when the transmission or the shift button does not properly operate in the P (Park) position. In this case, we recommend you to immediately have the vehicle inspected by an authorized HYUNDAI dealer.

Check shift controls

The warning message appears on the LCD display, when there is a malfunction with transmission shift button.

In this case, we recommend you to immediately have the vehicle inspected by an authorized HYUNDAI dealer.

    Parking

    Always come to a complete stop and continue to depress the brake pedal. Press the P button, apply the parking brake, and place the ignition switch in the LOCK/OFF position...

    Good driving practices

    Never shift the gear from P (Park) or N (Neutral) to any other position with the accelerator pedal depressed. Never shift the gear into P (Park) when the vehicle is in motion...

    Other information:

    Hyundai Palisade (LX2) 2020-2024 Service Manual: Description and operating principle


    Description and Operation Wireless Power Charger System During ACC or IG ON, battery voltage is supplied to the wireless power charger system to transmit an output of 5 W to mobile phone. Mobile phones certified with the wireless charging standard WPC (Qi 1...

    Hyundai Palisade (LX2) 2020-2024 Service Manual: Front Wheel Speed Sensor


    Components and components location Components 1. Front wheel speed sensor 2. Front wheel speed sensor connector Repair procedures Removal    • Be careful not to damage the parts located under the vehicle (floor under cover, fuel filter, fuel tank and canister) when raising the vehicle using the lift...

    Categories

    How Does the Air Bag System Operate?

    Hyundai Palisade. Operate?

    The SRS consists of the following components:

    1. Driver's front air bag module
    2. Passenger's front air bag module
    3. Side air bag modules
    4. Curtain air bag modules
    5. Retractor pre-tensioner
    6. Air bag warning light
    7. SRS control module (SRSCM)/ Rollover sensor
    8. Front impact sensors
    9. Side impact sensors
    10.Side pressure sensors
    11. Occupant classification system
    12. Driver’s knee airbag module

    read more


     
    Copyright © 2024 www.hpalisadelx.com