Hyundai Palisade (LX2): Body (Interior and Exterior) / Front Bumper

Replacement    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

Components 1. Front bumper cover 2. Front bumper side bracket [RH] 3. Front bumper side bracket [LH]

Other information:

Hyundai Palisade (LX2) 2020-2026 Service Manual: Intake Actuator

Description and operation Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.

Hyundai Palisade (LX2) 2020-2026 Service Manual: Troubleshooting

Troubleshooting    1) After replacing H/UNIT, always check that the system operates properly. 2) If the failure persists after replacing the H/UNIT, do not replace the unit.

Categories

 
Copyright © 2026 www.hpalisadelx.com - 0.0187