Hyundai Palisade (LX2): Door locks / Automatic Door Lock and Unlock Features
Your vehicle is equipped with features that will automatically lock or unlock your vehicle based on settings you select in the cluster LCD display.
Auto LOCK - Enable on Speed
When this feature is set in the cluster LCD display, all the doors will be locked automatically when the vehicle exceeds 9 mph (15 kph).
Auto LOCK - Enable on Shift
When this feature is set in the cluster LCD display, all the doors will be locked automatically when the vehicle is shifted out of P (Park) while the engine is running.
Auto UNLOCK - On shift to P
When this feature is set in the LCD cluster display, all the doors will be unlocked automatically when the vehicle is shifted back into P (Park).
Auto UNLOCK - On key out (if equipped with remote key)
When this feature is set in the LCD cluster display, all the doors will be unlocked automatically when the ignition key is removed from the key ignition switch.
Auto UNLOCK - Vehicle Off (if equipped with smart key)
When this feature is set in the LCD cluster display, all the doors will be unlocked automatically when the vehicle is off.
For more information on these features, refer to the LCD Display section later in this chapter.
Additional Unlock Safety Feature - Air Bag Deployment
As an additional safety feature, all doors will be automatically unlocked when an impact causes the air bags to deploy.
With the door lock button To unlock a door, push the door lock button (1) to the "Unlock" position. The red mark (2) on the door lock button will be visible.
The child safety lock is provided to help prevent children seated in the rear from accidentally opening the rear doors. The rear door safety locks should be used whenever children are in the vehicle.
Other information:
Hyundai Palisade (LX2) 2020-2026 Service Manual: Refrigerant Line
Components and components location Components [Isometric view] 1. Front suction & Liquid pipe assembly [Top view] 1. Front suction & Liquid pipe assembly Repair procedures Replacement [Front suction & Liquid pipe assem
Hyundai Palisade (LX2) 2020-2026 Service Manual: Repair procedures
Inspection Tolerance Compensation Tolerance compensation compensates for the error margins of around view video that occur due to the installation tolerance when the four cameras that comprise the SVM system are installed. You must carry out tolerance compensation if you do any of the following.
Categories
- Manuals Home
- Hyundai Palisade Owners Manual
- Hyundai Palisade Service Manual
- How to reset the power liftgate
- Engine Mechanical System
- Resetting the Driver's Seat Memory System
- New on site
- Most important about car
