| Specifications |
|
Item |
Specification |
|
|
Model |
Display Audio 2.0 |
|
|
Power supply |
DC 14.4V |
|
|
Parasitic current |
Max. 1mA (Head unit only) |
|
|
Antenna |
80PF 75Ω |
|
|
Tuning type |
PLL synthesized type |
|
|
Frequency range / Channel space |
FM |
87.5 - 108.0 MHz / 100 KHz |
|
AM |
531 - 1602 KHz / 9 KHz |
|
Component Location 1. Audio unit 2. Tweeter speaker 3. Roof antenna (Radio) 4. Front door speaker 5. Rear door speaker 6.
Description and operation Description The mode control actuator is located at the heater unit. It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level →
Inspection Tolerance Compensation Tolerance compensation compensates for the error margins of around view video that occur due to the installation tolerance when the four cameras that comprise the SVM system are installed. You must carry out tolerance compensation if you do any of the following.